LLY PACK(foshan) Co.,Ltd.

LLY PACK(foshan) Co.,Ltd.

Christina@lycorrugated.com

0086-13763260555

LLY PACK(foshan) Co.,Ltd.
Home> Blog> Causes of corrugated cardboard crimp line break

Causes of corrugated cardboard crimp line break

August 31, 2022

Corrugated paper easily breaks during the process of crimping

1) The gap between the upper and lower pressure rollers is too small

Adjust the gap between the upper and lower crimping rollers according to the corrugated shape of the cardboard and the thickness of the cardboard to maintain a reasonable pressure strength. For example, if the crimping strength is too small, it will not cause the crimping line to break. Cracking occurs, and this phenomenon occurs mostly in cardboard made from low-grade base paper.

(2) The combined position of the pressure roller is not aligned

In order to accurately install the crimping wheel, there is usually a 1mm centering slot in the processing of the crimping wheel. If the cooperation is not good, not only will the crimping crack and the combination of the box body have bad corners, but also the virtual gap of the shaking cover or The overlapping phenomenon causes defects in the cardboard box. Of course, the processing defects of the crimping wheels of various machines will also cause the crimping line to break.

(3) The problem of secondary rolling pressure

The edges and corners of the horizontal indentation line rolled by the upper and lower indentation wheels are always inferior to the indentation results of the indentation machine, but the productivity and economy of the two are difficult to compare. Therefore, in order to make the longitudinal indentation of the vertical indentation separation machine of the cardboard production line reach or approach the edge of the magnetic wire indentation, it is necessary to install the upper and lower indentation wheels on the two indentation shafts before and after the cardboard indentation machine respectively. The first rolling line is the pre-rolling indentation line, change the structure of the corrugated cardboard at the indentation, and then pass the second rolling indentation line, the first pre-pressure is slightly lower than the second rolling pressure, so that Achieve good corners.

Contact Us

Author:

Ms. Christina

Phone/WhatsApp:

+8613763260555

Popular Products
You may also like
Related Information
Corrugated cardboard market trends

With the continuous development of the economy, the packaging of products on the retail market has become more and more exquisite. Merchants have used gorgeous packaging to attract consumers'...

Corrugated cardboard pad printing

Koyu Trading Co., Ltd., a city in the center of Guangdong Province, has recently developed a printing technology that uses sponge liners under printing plates to greatly improve the printing quality...

Corrugated cardboard features and processing

In recent years, with the improvement of people's living standards, the requirements for the packaging of goods have become higher and higher. Corrugated cartons as commodity packaging containers can...

Corrugated cardboard box design for different ways

Corrugated design needs to be tested in the design of different factors and aspects, designed for different ways, according to the actual industrial methods and principles of control and use, first...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send